Proper insulation
ISOFOLIE® for roof and wall
Specially manufactured air cushions and highly reflective, aluminium-vapourised foils — for indoor and outdoor use, in roof and wall areas.
Reflect radiation instead of storing heat
ISOFOLIE® is used to reduce and prevent solar radiation input or heat radiation losses, as well as transmission heat losses. It can be used in roof and wall areas to reduce cooling and heating loads.
Specially manufactured air cushions and highly reflective aluminium-vapourised foils lend ISOFOLIE® exceptional properties for indoor and outdoor applications. Particularly noteworthy are the thermal conductivity lambda of 0.0198 W/(mK) and the reflection of up to 99 % of solar, cooling and thermal radiation.
ISOFOLIE® makes slim building constructions possible at the same insulation performance. The calculation is carried out according to DIN EN ISO 6946 with the energy demand calculation software from Hottgenroth.
Use in roof and wall
ISOFOLIE® for roof and wall
- calculation compliant with DIN EN ISO 6946
- interior and exterior application
- enables slim building construction
- easy installation
- heat reflection radiation into the room
- heat reflection effect against solar radiation
- high heating cost savings
- constant reflection values even after years — the reflective layer is protected from dust
- R-value from 0.909 to 5.909 (m²K/W) for wall and roof
- U-value from 0.169 to 1.1 W/(m²K) for wall and roof
- prevents thermal bridges
- can be used as a vapour barrier
- reflects up to 99 % of solar and thermal radiation
- thermal conductivity lambda = 0.0198 W/(mK) according to EN 12667
- no toxic outgassing
- no moisture absorption
- low primary energy demand
Pictures for illustration during installation
Arrange an introductory call
We look at your house, work through the comparison and tell you which building blocks pay off in your case — and which do not.